Scan the QR code and go.

How to unlock and start a JET scooter

To unlock a JET scooter, open the Go JET app, tap “Escanear código” (scan code) and point the camera at the QR code on the handlebar. If it won’t scan, tap “Insira o código” (enter the code) and type the scooter number. On the scooter card, choose a rate and tap the blue button to start. To turn it off, park in an area marked on the map, tap “Encerrar” (end) and take the photo.

Your ride, step by step

  1. Scan
  2. QR code
  3. Scooter card
  4. Start
  5. Go
  6. End
Read the guide

Source: screenshots of the Go JET app taken on November 17, 2026, the app’s “Como andar de patinete” (how to ride) guide, JET’s FAQ and the Termos e Condições de Locação do Go JET (Go JET rental terms), updated November 12, 2026.

How to unlock a JET scooter in 6 steps

Unlocking a JET scooter takes six steps in the Go JET app, from the QR scanner to the final photo. They expand on Step 2 of the full JET step-by-step guide. The table sums up each step and what can go wrong.

Button names in quotes are the ones the Go JET app shows in Portuguese. The app is also available in English: if yours is set to English, the buttons are in English too, so go by the meaning given in parentheses.

Swipe to compare the columns.

How to unlock a JET scooter in 6 steps
Step What you do What can go wrong
1. Scan On the app map, tap “Escanear código” (scan code) Your phone asks for camera access: allow it
2. QR code Point the camera at the QR code on the handlebar The camera won’t read it: tap “Insira o código” (enter the code) and type the number
3. Scooter card Check the number and the battery, then choose a rate The number doesn’t match the handlebar: don’t start the ride
4. Start Tap the blue button to start A defect right at the start: end the ride within 30 seconds
5. Go Lift the kickstand, push off and accelerate The scooter won’t pick up speed: some areas have a lower limit
6. End Park in an area marked on the map, tap “Encerrar” (end) and take the photo According to JET’s FAQ, outside a zona P (parking zone) the ride doesn’t end

How to unlock the scooter with the QR code

A JET scooter unlocks with the QR code on the handlebar, read by the Go JET app. Get your account and payment method ready before you reach the scooter. Then follow these steps:

  1. Open the Go JET map and tap “Escanear código” (scan code).
  2. Allow camera access if your phone asks.
  3. Point the camera at the QR code on the handlebar, on the “Escanear o QR-code” (scan the QR code) screen.

Once the code is read, the app opens the scooter card. Is it dark? The scanner screen has a flashlight button.

Check the scooter before you scan: look for any damage, such as a broken wheel. The card also opens from the map: tap the scooter icon.

Go JET app scanner screen, Escanear o QR-code: the camera points at the QR code on the handlebar of a JET scooter; below, the flashlight and the Insira o código button
The “Escanear o QR-code” (scan the QR code) screen: the code is on the handlebar. Below, the flashlight and the “Insira o código” (enter the code) button.

The QR code won’t scan: type the scooter number

If the camera can’t read the QR code, the Go JET app accepts the scooter number. On the scanner screen, tap “Insira o código” (enter the code). Type the six-digit number printed below the QR code, on the handlebar. The card that opens shows the same number: check it before you start.

How to start a JET scooter: the scooter card and the blue button

To start a JET scooter, begin the ride on the scooter card. Reading the QR code only opens the card: the ride hasn’t started yet. Before you start, check three things:

  1. Compare the number on the card with the number on the handlebar.
  2. Look at the battery: the card shows the charge and a time estimate.
  3. Choose a rate: the app shows the price of each option.

Then tap the blue button below the card to start. The price depends on the city and your user category. So check the amount on the card before you tap.

Want to add the extended insurance? It’s optional and goes on the same card, before you start. The app shows the terms. See how JET scooter insurance works.

Got a promo code? Activate it before you start the ride: in the Menu, open “Códigos promocionais” (promo codes) and tap “Insira código” (enter code). New to Go JET? See JET’s official promo code.

How to accelerate and brake on a JET scooter

To set off on a JET scooter, lift the kickstand, push off with your foot and press the throttle. The order follows the “Como andar de patinete” (how to ride) guide in the Go JET app Menu:

  1. Lift the kickstand with your foot.
  2. Put one foot on the scooter and push off with the other while pressing the throttle.
  3. Put your other foot on the deck.
  4. Keep your right thumb on the throttle.
  5. Use the left lever, or both at once, to brake.

Right after unlocking, test the throttle and the brakes, as JET’s FAQ asks. A JET scooter goes up to 20 km/h, a limit set by JET’s system. First time? Read the scooter safety tips before you set off.

The scooter won’t accelerate?

In some areas, and for new users in some cities, a JET scooter’s top speed is lower. According to JET’s FAQ, the gray zone (zona cinza) on the map has reduced speed, and in the red zone (zona vermelha) the scooter stops. See what to do when the scooter is slow or won’t accelerate.

During the ride: pause, resume and add another scooter

The ride screen in the Go JET app shows the time, the scooter number and the battery. Below are two buttons: “Pausar” (pause) and “Encerrar” (end).

Need to stop along the way? Tap “Pausar”. The app shows the pause time next to the ride time. To ride again, tap “Retomar” (resume). According to JET’s FAQ, during a pause the scooter stays locked and the paused time is also charged.

Riding with friends? With a ride running, tap “Adicionar mais” (add more) and scan the QR code on the other scooter. According to the app’s store listing, one Go JET account can rent up to 5 scooters. But the Go JET terms forbid anyone else from using a scooter rented on your account. Check the Go JET app before you rent for someone else.

Bottom of the ride screen in the Go JET app: timer, scooter number, battery and the Pausar and Encerrar buttons
The ride screen: time, scooter number, battery and the “Pausar” (pause) and “Encerrar” (end) buttons. The map is left out of the image.

How to turn off a JET scooter: end the ride and take the photo

To turn off a JET scooter, end the ride in the Go JET app. Switching the scooter off does not end the ride. According to JET’s FAQ, a ride only ends in a zona P, the parking area. On the Go JET app map, these areas are marked with an “E” icon (for estacionamento, parking). Here’s how:

  1. Park in a parking area marked on the map.
  2. Lower the kickstand and check that the scooter is steady.
  3. Tap “Encerrar” (end).
  4. Take a photo of the parked scooter on the “Tirar uma foto” (take a photo) screen.
  5. Check the summary and tap “Feito” (done).

The summary appears on the “Resumo da sua viagem” (your ride summary) screen, with the total and the ride duration. The ride won’t end? See how to finish in a zona P and what changes outside one.

Go JET app Tirar uma foto screen: the camera frames a parked JET scooter, with the shutter button below
The “Tirar uma foto” (take a photo) screen: frame the parked scooter and tap the shutter button.
Go JET app Resumo da sua viagem screen: total hidden, total duration, the Mais detalhes link, the ride rating and the Feito button
The “Resumo da sua viagem” (your ride summary) screen: total, duration and the “Feito” (done) button. The amount is hidden in this image.

A faulty scooter at the start of the ride

According to JET’s FAQ, if you end the ride within 30 seconds because of a defect, you are not charged. So test the throttle and the brakes right after unlocking. Something not working? Tap “Encerrar” (end) and pick another scooter on the map.

The scooter won’t unlock, or the ride won’t end? Contact support through the app: in “Perguntas frequentes” (FAQ), tap “Acesse ajuda” (get help) and choose “Chat”. Give your account phone number, the scooter number and its location. More answers are in the JET help center.

Frequently asked questions

The QR code on my JET scooter won’t work. What now?

On the scanner screen in the Go JET app, tap “Insira o código” (enter the code) and type the scooter number: six digits, below the QR code on the handlebar. In the dark, use the flashlight button on the same screen.

My JET scooter won’t unlock. What should I do?

Check that the number on the scooter card matches the one on the handlebar, and that “Carteira” (wallet) in the Go JET app has a payment card or balance. If the scooter stays locked, pick another one on the map or contact support through the in-app chat and give the scooter number.

Does unlocking a JET scooter start the charge right away?

Reading the QR code only opens the scooter card. The ride starts when you tap the blue button on the card. The rate and the unlock price are shown on the card before that: check them in the Go JET app.

How do I pause a ride in the Go JET app?

On the ride screen, tap “Pausar” (pause). To ride again, tap “Retomar” (resume). According to JET’s FAQ, during a pause the scooter stays locked and the paused time is also charged.

How do I turn off a JET scooter?

End the ride in the Go JET app: park in a parking area marked on the map, tap “Encerrar” (end) and take a photo of the scooter. Switching the scooter off does not end the ride.

When does the Go JET app ask for a photo of the scooter?

At the end of the ride. After you tap “Encerrar” (end), the app opens the “Tirar uma foto” (take a photo) screen and asks for a photo of the parked scooter to end the ride. Then the ride summary appears: tap “Feito” (done).

Your next route,
by JET.

Find a scooter and check the operating area in the app.