Scooter running slow?

JET scooter slow or won’t accelerate: why it happens and what to do

If your JET scooter is slow, check the area you’re in: according to JET’s FAQ, the top speed is lower in the zona cinza (gray zone) on the app map. In some cities, new users also have a lower limit, such as 15 km/h for the first 10 rides in São Paulo. Outside these areas, the system limit is 20 km/h.

People who search for how to turn off “turtle mode” (modo tartaruga in Portuguese) on a JET scooter want to know why it lost speed. JET and city government sources explain the cases of reduced speed: the zona cinza, the zona vermelha (red zone), the rule for new users and the limits JET sets in the app. Outside these cases, it may be a defect. The full step-by-step guide is in how a JET ride works.

Why is my JET scooter slow?

A JET scooter slows down because of an area rule, a city rule or a defect. Without these causes, it goes up to 20 km/h, JET’s system limit. According to JET’s FAQ, the app map shows reduced-speed zones (gray) and prohibited zones (red). Check the map legend in the Go JET app. The table shows how to spot each case.

Swipe to compare the columns.

Why is my JET scooter slow?
Cause How to spot it What to do
Zona cinza The area is gray on the app map Ride through the zona branca (white zone) when your route allows
New-user limit You’re on one of your first rides in a city with this rule Nothing to do: in São Paulo, the limit ends after 10 rides
Zona vermelha The area is red on the map, and the scooter slows down and stops Push it to the zona branca, as JET recommends
Attention zone The app caps speed at 14 km/h in an attention zone or restricted area, according to JET’s manual Follow the limit: the lowest one always applies
Automatic slowdown JET may reduce the speed based on location, according to JET’s manual Nothing to do: it’s a rule for the area
Defect The scooter won’t accelerate in any area End the ride within 30 seconds or contact support
System limit The scooter won’t go past 20 km/h Nothing to do: it’s JET’s maximum

The zona cinza, the new-user limit and JET’s limits are rules, not faults.

New-user limits: São Paulo, Belo Horizonte and other cities

In São Paulo, Belo Horizonte and Curitiba, the city government or the local edital (public call for operators) sets a lower limit for beginners. In Salvador, Semob (the city mobility office) announced this limit on November 14, 2025. The table lists the published limits and the source of each one.

Swipe to compare the columns.

New-user limits: São Paulo, Belo Horizonte and other cities
City Limit Who or where Source
São Paulo 15 km/h First 10 rides São Paulo city government FAQ
Belo Horizonte 12 km/h or 15 km/h, depending on the source First 10 rides Belo Horizonte city government: news from March and July 2026 (12 km/h) and the FAQ of Sumob, the city mobility office (15 km/h)
Salvador 15 km/h Until you complete 15 km or 5 rides Semob, announcement of November 14, 2025
Curitiba 15 km/h First 5 rides or first 30 minutes, whichever comes first Edital of Urbs (Curitiba’s urban transport company)
Santo André 12 km/h Inside Parque Central, controlled by GPS Diário do Grande ABC (local newspaper), April 26, 2026

According to the São Paulo city government, the 15 km/h limit ends after your 10th ride. After that, 20 km/h applies. See the local rules for the JET scooter in São Paulo.

What’s your limit in Belo Horizonte? Check the Go JET app. Read about the JET scooter in Belo Horizonte.

In Santo André, the 12 km/h limit applies to the Parque Central area, not to the user. The background is in the JET launch in Santo André (in Portuguese).

In Salvador and Curitiba, check your limit in the Go JET app.

In Recife, according to the city government and CTTU (the city traffic agency) in the Diario de Pernambuco (local newspaper) of April 6, 2026, the limit during the trial period is 20 km/h. It’s not a rule for new users: it’s the same as the system limit.

In other cities, check the Go JET app for a new-user limit before your first ride.

Zona cinza on the app map

According to JET’s FAQ, the zona cinza on the map marks an area with reduced speed. The FAQ doesn’t give the exact limit. Check the map legend in the app for your city.

Look at the map before you set off, not halfway there. If your route crosses a zona cinza, expect a slower stretch.

According to JET’s FAQ, in the zona vermelha the scooter slows down and stops. JET recommends pushing it to the zona branca. See what the zone colors on the map allow.

Limits JET sets in the app

According to JET’s Manual de Condução Defensiva (defensive riding manual), besides the general 20 km/h limit, JET sets 14 km/h in attention zones or restricted areas and 6 km/h in pedestrian areas, only where authorized. The lowest limit always applies, among the app, the signage, the city’s rule and the infrastructure you are using. The manual does not link the attention zone to a map color.

Under the same manual, JET may reduce the speed automatically by location, depending on the area, local risk, time of day, pedestrian traffic or a city government requirement. The three limits are in the electric scooter rules.

The scooter won’t accelerate at all: what to do

If your JET scooter won’t accelerate even in the zona branca, it may be a defect. According to JET’s FAQ, if you end the ride within 30 seconds because of a defect, you’re not charged. Follow these steps:

  1. Open the map in the Go JET app and check the color of the area.
  2. End the ride within 30 seconds if the scooter won’t accelerate in the zona branca.
  3. Pick another scooter on the map.
  4. Contact support through the app chat if the problem starts mid-ride.

Test the acceleration in the first few meters, while you’re still close to where you started. That way, a defect shows up within the 30-second window.

Not sure how to start the ride? See unlocking with the QR code, step by step.

What about “turtle mode”?

The term modo tartaruga (turtle mode) doesn’t appear in JET’s FAQ or in the public Go JET documents for Brazil. It’s what users call a slow scooter. A figure of 5 km/h circulates online, and videos give tips to get back to normal speed. No JET source confirms that speed or those tips.

The sources confirm the reduced-speed zone, the zona cinza on the map, the new-user limit in some cities and the limits JET sets in the app, with the automatic slowdown by location. No JET source calls these limits turtle mode.

Red light, purple light or flashing yellow: JET’s public sources don’t explain the dashboard lights. They also don’t say whether a low battery reduces speed. In these cases, ask support instead of guessing.

When to contact support

Contact JET support in three cases. The scooter is still slow in the zona branca after the new-user period. The scooter stopped accelerating mid-ride. A dashboard light came on and the app doesn’t explain why.

Support is available through the Go JET app chat and by email at brsupport@jetshr.com. There’s no direct phone line.

In your message, include the city, the scooter number and the stretch where the speed dropped. Were you charged for a ride with a defect? Ask for a review. Under the Go JET terms, the review takes up to 2 business days after you send the requested information. Deadlines are covered in wrong charges and refunds.

See JET’s support channels.

Frequently asked questions

Why won’t my JET scooter accelerate?

If your JET scooter won’t accelerate even in the zona branca (white zone) on the map, it may be a defect. According to JET’s FAQ, if you end the ride within 30 seconds because of a defect, you’re not charged. If it’s just slow, check the color of the area on the map: according to the same FAQ, the speed is lower in the zona cinza (gray zone), and in the zona vermelha (red zone) the scooter slows down and stops. Check the legend in the Go JET app.

Do new riders have a speed limit on JET scooters?

Yes, in some cities. In São Paulo, according to the city government, the limit is 15 km/h for the first 10 rides. In Belo Horizonte, the city government cites 12 km/h and 15 km/h for beginners: check your limit in the Go JET app.

What is the reduced-speed zone?

According to JET’s FAQ, it’s the zona cinza (gray zone) on the app map: there, the scooter’s top speed is lower than the system’s 20 km/h. Check the map legend for your city in the Go JET app.

Can I make a JET scooter go faster?

No. According to JET, the top speed of 20 km/h is limited by the system. In São Paulo, the 15 km/h limit for new users applies only to the first 10 rides.

Your next route,
by JET.

Find a scooter and check the operating area in the app.